最近新增的巨集


1-10 之 50 為 "最近新增的巨集" 每頁結果數:
< 12345 >
Match sub component unit system with main assembly
下載: 7

(TBD)
提供於: 2010/8/10
描述: Macro matches all sub-parts and sub-assemblies unit system with main assembly unit system.
根據: Amirtharaj K
公司: EGS Computers India Pvt Ltd
類別: Assemblies 
標籤:
 assembly  unit 
Save as PDF with Folder Selection
下載: 160

(2 評價)
提供於: 2010/6/3
描述: This macros saves your open document as a PDF file. User is allowed to select the save folder or use defaults.
根據: Matthew Lorono
公司: Cepheid
類別: Drawings 
標籤:
 adobe  as  assembly  drawing  lorono  part  pdf  save 
OffsetCut
下載: 25

(TBD)
提供於: 2010/6/1
描述: need to shave off 0.1 inch in a part
根據: Mike Spens
公司: GoEngineer
類別: Parts 
標籤:
 macro  part 
Printing
下載: 48

(TBD)
提供於: 2010/5/28
描述: 1 button printing function
根據: Mike Spens
公司: GoEngineer
類別: Drawings 
標籤:
 drawings  macros  print 
Save assembly as eDrawing
下載: 40

(TBD)
提供於: 2010/5/11
描述: Save the assembly in .easm file in the same folder
根據: Nicolas Garneau
公司: Gecko Alliance
類別: Assemblies 
標籤:
 assembly  assy  edrawing  export  save 
Save as eDrawing
下載: 41

(TBD)
提供於: 2010/5/11
描述: Save the part in .eprt file in the same folder
根據: Nicolas Garneau
公司: Gecko Alliance
類別: Parts 
標籤:
 edrawing  export  macro  save 
PDF drawing in same location then close drawing
下載: 150

(TBD)
提供於: 2010/4/21
描述: Creates a PDF of the Drawing file thats open and saves the PDF in the same location and file name as the drawing. The program then closes the drawing once the PDF is created.
根據: Nick Brown
公司: Purolator Facet
類別: Other 
標籤:
 _drawing  _pdf_generation  _save_pdf  pdf 
Model Player 2010
下載: 201

(1 評價)
提供於: 2010/4/15
描述: Cycle through all features in a part using a slider and hide/show individual features. Easy way to understand how a part was built. Will work on earlier versions of SolidWorks - just edit the macro, go to Tools > References, and select your version of the SolidWorks Type Library.
根據: Neil Cooke
公司: Dassault Systèmes SolidWorks Corp.
類別: Parts 
標籤:
 _windows_7  model_player_2010 
Rebuild And Save All Parts
下載: 75

(1 評價)
提供於: 2010/3/30
描述: If run in an assembly or drawing file this macro will open all referenced parts do a hard rebuild and them save the files in the same directory. This macro has been tested in Solidworks version 2009.
根據: Mike Hauptman
公司: Tegrant Corporation - Alloyd Brands
類別: Drawings 
Title Block editor
下載: 59

(TBD)
提供於: 2010/3/27
描述: You Can Edit Title Block In Part or Assembly mode itself
根據: Gururaj k
公司: Apicom Automatation
類別: Parts 

< 12345 >